Functional polymers based on acrylamide crosslinked copolymers

Crosslinked copolymers of acrylamide were obtained by the aqueous suspension polymerization method. Divinylbenzene and N,N-methylene-bis-acrylamide were used as crosslinking agents. Ethylacrylate was used as a third comonomer. The real acrylamide content in the crosslinked copolymers was calculated taking into account the found nitrogen content after the removal of the soluble fractions. The water uptake in dependence on the copolymer structure gave information on the hydrophilicity of these copolymers. Hofmann degradation of the amide groups led to copolymers containing vinylamine functional groups, which were characterized by IR spectroscopy and by anion exchange capacity. Carboxylic groups were generated by the alkaline hydrolysis of the ester groups.     

Surface modification by self-assembled polycation/azo dye multilayers

The formation and stability of some polycation/azo dye multilayers by the alternate adsorption of one polycation of integral type having 95 mol% of N,N-dimethyl-2-hydroxypropyleneammonium chloride repeat units (PCA₅) and four multicharged azo dyes: Crocein Scralet MOO (CSMOO), Ponceau SS (PSS), Direct Blue 1 (DB 1) and Direct Red 80 (DR 80) are discussed in this paper. The dyes were different either by the number of sulfonic groups (PSS, DB 1 and DR 80) or by their position (CSMOO and PSS). The multilayer growth, when PCA₅ was adsorbed from 0.2 M Na₂SO₄ aqueous solution, was followed by UV-Vis spectroscopy and by electrokinetic measurements. Solid state polycation/azo dye complexes were also prepared to get qualitative information on the charge compensation in the multilayers.     

Preparation and Characterization of Semi-IPN Cryogels Based on Polyacrylamide and Poly(N,N-dimethylaminoethyl methacrylate); Functionalization of Carrier with Monochlorotriazinyl-β-cyclodextrin and Release Kinetics of Curcumin

Curcumin (CCM) is a natural hydrophobic polyphenol known for its numerous applications in the food industry as a colorant or jelly stabilizer, and in the pharmaceutical industry due to its anti-inflammatory, antibacterial, antioxidant, anti-cancer, and anti-Alzheimer properties. However, the large application of CCM is limited by its poor solubility in water and low stability. To enhance the bioavailability of CCM, and to protect it against the external degradation agents, a novel strategy, which consists in the preparation of semi-interpenetrating polymer networks, (s-IPNs) based on poly(N,N-dimethylaminoethyl methacrylate) entrapped in poly(acrylamide) networks, by a cryogelation technique, was developed in this work. All s-IPN cryogels were characterized by SEM, EDX, FTIR, and swelling at equilibrium as a function of pH. Functionalization of semi-IPN cryogel with monochlorotriazinyl-β-cyclodextrin (MCT-β-CD) led to IPN cryogel. The release profile of CCM from the composite cryogels was investigated at 37 °C, in pH 3. It was found that the cumulative release increased with the increase of the carrier hydrophobicity, as a result of increasing the cross-linking degree, the content and the molar mass of PDMAEMA. Fitting Higuchi, Korsmeyer–Peppas, and first order kinetic models on the CCM release profiles indicated the diffusion as the main driving force of drug release from the composite cryogels.     

Cationic polyelectrolytes. V. On macromolecular chain conformational state during amination reactions of CMPS

The macromolecular chain conformational state during the amination of chloromethylated polystyrene (CMPS) with two aliphatic amines, namely methyl(2-hydroxyethyl)amine (MHEA) and N,N-dimethyl(2-hydroxypropyl)amine (DM2HPA), has been studied. Viscosimetric and light scattering measurements were performed during reactions in binary solvent mixtures. The observed kinetic deviations have been related with the conformational transformations of the macromolecular chain.     

Cationic polyelectrolytes. I. Soluble polymers prepared from reaction of chloromethylated polystyrene with tris(2-hydroxythyl)amine

The reaction of chloromethylated polystyrene with tris(2-hydroxyethyl)amine in N,N-dimethylformamide is described for the conditions to prepare soluble reaction products. The groups of the quaternary ammonium salt, which appear in the first stage of the reaction, transpose to the amino-ether groups. The reaction was followed by elementary analysis, IR and ¹H-NMR spectra, and viscosimetric measurements for nondialyzed and dialyzed samples. The presence of the tertiary amine groups on obtained polymers was also shown by titration. The polymers from the reaction of chloromethylated polystyrene with tris(2-hydroxyethyl)amine reacted easily with benzyl chloride.     

Polyelectrolyte complex dispersions with a high colloidal stability controlled by the polyion structure and titrant addition rate

Three ionic/nonionic random copolymers of sodium 2-acrylamido-2-methylpropanesulfonate (AMPS) with either t-butyl acrylamide (TBA) or methyl methacrylate (MM), were used in the preparation of some polyelectrolyte complex dispersions (PCD) with two strong polycations of integral type, poly(diallyldimethylammonium chloride) (PDADMAC), and an ionene type polycation, containing 95 mol% N,N-dimethyl-2-hydroxypropyleneammonium chloride repeat units (PCA₅). The novelty of the paper is that PCDs with a high colloidal stability, both before and after the complex stoichiometry, were obtained even with hydrophilic/hydrophobic polyanions, with a high titrant addition rate (TAR), a less explored parameter, which allows a fine control of PCDs aggregation level, in salt-free aqueous solutions. The characteristics of PCDs were also correlated with the polyanion average charge density and the structure of the nonionic comonomer, at a constant TAR, the polyanion with the lowest charge density leading to the highest turbidities and the lowest colloidal stabilities. A mechanism of the PCDs colloidal stabilization as a function of TAR was suggested in the paper.     

Ion‐exchange resins. III. Functionalization–morphology correlations in the synthesis of some macroporous,strong basic anion exchangers and uranium‐sorption properties evaluation

The synthesis and characterization of a series of macroporous, strong basic anion exchangers (SBAEs), with an average pore radius higher than 50 nm, and the evaluation of their sorption properties for uranyl chlorocomplexes from HCl solutions are reported. Finely divided macroporous styrene–divinylbenzene (S–DVB) copolymers with a narrow distribution of beads sizes, diameters within the range of 90–200 μm, were prepared for this purpose with 2‐ethyl‐1‐hexanol as a porogen, at a high dilution of monomers (D ≥ 0.55 mL/mL). Chloromethyl groups were introduced with (CH₂O)_n/Me₃SiCl as a chloromethylation agent in the presence of a Lewis acid as a catalyst (TiCl₄, SnCl₄, and FeCl₃) in CHCl₃ as a reaction medium. SnCl₄ and FeCl₃ gave comparable chloromethylation degrees in the same reaction conditions. TiCl₄ was not efficient as a catalyst in the chloromethylation with this reagent. Diethyl‐2‐hydroxyethylamine was used as a tertiary amine to prepare SBAEs. Structural and morphological characteristics were determined after every functionalization step of the macroporous network. Both the chloromethylation, in the presence of FeCl₃ as a catalyst, and the amination reactions determined a significant decrease of the pore volume, in the whole range of the nominal crosslinking degree, comparative with the starting copolymer. The specific surface area and the average pore radius varied in a different way as a function of the nominal crosslinking degree. Thus, the specific surface area increased and the average pore radius decreased after chloromethylation and amination for copolymers with a DVB content lower than 10 wt %. Small decreases of the specific surface area and the average pore radius were observed after chloromethylation and amination reactions for copolymers with a DVB content higher than 10 wt %. SBAEs were also characterized by thermogravimetric analysis and sorption capacity for uranyl chlorocomplexes. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2451–2461, 2004     

Cationic polyelectrolytes. IV. Kinetic study of the reaction of acrylic polymers containing tertiary amine groups with halogenated compounds in dipolar aprotic solvents

The reaction kinetics of halogenated compounds with tertiary amine groups attached at an acrylic macromolecular chain have ben studied. Three acrylic polymers were used. Two of them have mainly a structural unit of N, N-dimethylaminopropylacrylamide and the third is poly(N,N-dimethylaminoethylmethacrylate). Dimethylformamide, dimethylacetamide, and dimethylsulfoxide (DMSO) were used as dipolar aprotic solvents. Benzyl chloride and allyl chloride were considered as halogenated compounds with increased reactivity. The reaction kinetics depend on the polymer and halogenated-compound structures as well as the nature of the solvent. In the most of the cases the reactions carried out on polymers are accompanied by self-accelerating processes, with the exception of DMSO, which obviously has normal second-order kinetics. The reaction of polymers containing units of N,N-dimethylaminopropylacrylamide are compared with one having a low molecular weight, for instance N,N′-bis(3-dimethylaminopropyl)glutaramide.